Arctic Fox Truck Camper Problems

The Arctic Fox truck camper is a popular choice for RVers looking for a luxury camp experience. However, as with any vehicle, there are some potential issues that could arise. In this article, we’ll discuss some of the common problems associated with the Arctic Fox Truck Camper and how to prevent or fix them.

Delamination problems

Delamination problems are one of the most common problems associated with Arctic Fox truck campers. Delamination occurs when the composite layers separate from each other due to long-term exposure to water, UV light, or extreme temperatures. If your camper is starting to show signs of delamination, then it’s important to take action quickly in order to prevent further damage. One way to fix this problem is by applying a sealant over the affected area.

Here’s how some owners described their experience:

“I recently found a bubble on the front of my 08′ AF 990 and also loose hanging laminate under the front overhang of my camper. Both Dealer and MFG say it might be water due to non maintenance on my part. I was never informed by the Dealer that I needed to do yearly maintenance in order to avoid water damage. I have done basic inspections, but I am not sure I would recognize a real leak or not.”

One of the most common problems with Arctic Fox Truck Campers is delamination. This is when the outer layers of lamination separate from each other and can lead to water damage. To prevent this issue from occurring, it’s important to do regular inspections and maintenance. In some cases, resealing may be necessary if a leak has been detected.

The sheathing is coming off under the back of the truck

This is another common problem that can occur with the Arctic Fox truck camper. If you find that the sheathing underneath the back of the truck is coming off, it’s important to take action quickly. In most cases, this will require taking apart the entire camper in order to access and fix the sheathing.

Here’s how some owners described their experience:

“I have a new Arctix Fox 860 and the sheathing (attached by small staples) is coming off the area that extends under the back of the truck near the generator. The insulation is showing. When I called the factory they said that the camper is not meant to be taken off the truck unless stored with additional structures to assist the jacks. They said this was explained in the warranty book. I could not find anything about this topic in the warranty and all dealers leave the campers on the lots propped up by jacks. I bought the camper so that I could drop it and go exploring. Also, the dealer is telling me not to fill the camper with water when driving. How else would I get to my camping destination with water? Why did they fill it for me when I picked up the camper?”

In order to prevent the sheathing from coming off, it’s important to be mindful of how the camper is stored when not in use. If you plan on taking your camper out for extended periods of time, it’s important to make sure that there are additional structures in place to support the jacks. Additionally, it’s important to ensure that the camper isn’t filled with too much water during transport – this can cause extra stress on the frame and lead to sheathing issues.

Other Problems with Arctic Fox Truck Camper

  • Heating Issues: If your Arctic Fox Truck Camper is having trouble heating, it could be due to a faulty thermostat or an air leak. To fix this issue, you should check the thermostat and make sure it’s working properly. You should also check for any air leaks, which can be found around the windows, doors, and vents.
  • Water Leaks: Water leaks are a common problem with all RVs, and Arctic Fox Truck Campers are no exception. To fix this problem, you should inspect the seals around the windows and doors, as well as the roof seals. If there is any damage, it should be repaired or replaced.
  • Poor Insulation: Poor insulation can lead to uncomfortable temperatures inside the camper, as well as increased energy costs. To fix this issue, you should inspect the insulation and replace any that is damaged or missing.
  • Electrical Problems: Electrical problems can be caused by faulty wiring, bad connections, or overloaded circuits. To fix this issue, you should inspect the wiring and connections, and replace any that are damaged or not working correctly.
  • Window and Door Issues: If your windows and doors are not working properly, it could be due to a faulty seal or latch. To fix this issue, you should inspect the seals and latches, and replace any that are not functioning properly.

These are some of the most common problems with Arctic Fox Truck Campers, and how to fix them. By inspecting the camper regularly and making repairs as needed, you can ensure that your camper is working properly and providing you with a comfortable and enjoyable camping experience.

+ posts

Philippe strives to give you the best overview of automotive equipment, tools, parts, and solutions to a variety of complex automotive problems, based on his own experience. You can read his car reviews on TopSpeed.

We will be happy to hear your thoughts

Leave a reply

RV Camp Gear
Logo
Enable registration in settings - general